Adding 125 kHz cards manually
You can add new virtual cards to your Flipper Zero without reading a physical card. All you need to do is choose the protocol and enter the card’s data manually. The added card can be emulated or written to a T5577 blank card.
On this page, you’ll learn how to add a new card and edit a card’s data.
Supported protocols
You can manually add virtual cards with the following protocols:
- EM-Micro EM4100
- EM-Micro EM4100/32
- EM-Micro EM4100/16
- HID H10301
- IDTECK Idteck
- Motorola Indala 26
- Kantech IoProx XSF
- AWID
- FECAVA FDX-A
- ISO FDX-B
- Generic HID Prox
- Generic HID Ext
- Farpointe Pyramid
- Viking
- Jablotron
- Paradox
- PAC Stanley
- Keri
- Gallagher
- Honeywell Nexwatch
- Electra
- Securakey
- Guardall G-Prox II
- Noralsy
How to add 125 kHz RFID cards
To add a virtual card, do the following:
Go to Main Menu -> 125 kHz RFID -> Add Manually.
Select the protocol you want to use and press %ok%OK.
Enter the card’s data in hexadecimal, then press Save.
Name the card, then press Save.
Editing 125 kHz RFID cards
You can edit data of 125 kHz RFID cards on your Flipper Zero. This applies to data both manually added and captured from physical cards. To edit a card’s data, follow these steps:
Go to Main Menu -> 125 kHz RFID -> Saved.
Select the card you want to edit by pressing %ok%OK, then press Edit.
Enter new data in hexadecimal, then press Save.